OR8

 

Optocoupler/Relay cards - OR8, R8

 

CONNECT DIGITIAL SIGNALS.
QUITE SIMPLE.

The optocoupler and relay boards OR8 and R8 are ideal to monitor and control digital states. The digital inputs and outputs can be connected directly via a screw-clamp connection.
 

8 OPTOCOUPLER INPUTS (OR8).
8 RELAY OUTPUTS (OR8, R8).

The eight optocouplers on the OR8 convert digital inputs in the voltage range of 5..30V into TTL signals. Via relays, the OR8 and R8 switch eight control lines (TTL) with up to 6A.
 

CLEARLY SAFE.

Due to the galvanic isolation of the channels from each other and from the data acquisition and control system, the whole system is perfectly protected.
 

CURRENT STATES.

Eight LEDs each dedicated to the inputs and outputs signalize if a channel is high or low.

 WELL SUPPLIED.

The R8 is operated with 5V. The OR8 is powered with 9-40V but can also be configured to 5V supply. The supply voltage is also connected via screw-clamp terminals.
 

DIN RAIL MOUNTING.

The optocoupler and relay boards are suitable for DIN rail mounting. A DIN rail carrier (ZU-EW) with bracket is already included with the delivery of the OR8. It can be ordered as accessory for the R8.
 

COMPATIBILITY.

Particularly simple is the connection to the digital I/O interface USB-PIO as only a 25-pin D-Sub extension cable is needed for connecting.

 
 
 

Help us serve you better!

Daytronic strives to continue serving customers in the best way possible. Help us improve your experience by taking a simple survey. Please choose the correct survey and take a few moments to complete it. Thank you!

Existing Customers New Customers ×