Dual Analog Output Card – Counter Meter Only

With the dual-output version Option “C2” for the Counter Meter, either output can be selected as 4-20 mA, 0-20 mA, or unipolar 0-10V. The ground of the two outputs is shared. One of the outputs would typically be tied to the displayed item, while the second output may be tied to a non-displayed item. For example, with the extended frequency meter, Item #1 can be assigned to rate, while Item #2 is assigned to total.

  • Dual analog output: 4-20 mA, 0-20 mA, 0-10V with shared ground
  • 16-bit resolution (1 part in 65,536 or 0.0015% of full scale)
  • Analog output linearized to reading
  • Analog output isolated to 250 Vac
  • ±0.02% full scale accuracy
  • Scale and offset via meter front panel, RS232, RS485 or USB
  • 50 Hz or 60 Hz update rate
  • 12V compliance at 20 mA
  • Output derived from filtered or unfiltered signal input

Help us serve you better!

Daytronic strives to continue serving customers in the best way possible. Help us improve your experience by taking a simple survey. Please choose the correct survey and take a few moments to complete it. Thank you!

Existing Customers New Customers ×